NEONAIL Duo Acrylgel is a new product that will revolutionise the world of manicures. The new form of the product is an innovative solution—a combination of the strength of acrylic and the lightness and flexibility of gel.

The product provides:

• Thick consistency - does not flow onto the cuticles,

• Possibility of nail extension and modeling

• Durable styling: nails are very resistant to damage

• Extension of five nails at the same time - without fear of the product moving on the nail plate

• Application using a template

• Comfortable work without rushing—curing in the LED lamp without feeling the heat

• No unpleasant odour

Professional Duo Acrylgel is easier and  faster to apply than traditional gel, which has a thinner consistency. When regrowth appears, you can supplement the product by applying Duo Acrylgel after removing the color. Then, just prepare the nail and apply a coloured hybrid varnish.

Cover Pink - a pink, slightly peach shade.

Application with Tipsa Duo Acrylgel:

1. Gently mat the nail plate with a polishing block, remove the dust with a brush, and wash the nails with cleaner.

2. Pull back the cuticles and, if necessary, cut them out with pliers.

3. To increase adhesion, apply a thin layer of hard base and cure in an LED lamp or UV lamp according to the table. If we have a problematic tile, you can also use Primer.

4. Apply the appropriate amount of product to the inside of the nail tip, taking into account the correct "C curve" structure (a small amount of the product should be around the cuticles and on the free edge, and more in the middle of the nail tip). In order to smooth the product on the nail tip and achieve the desired length, use a brush soaked in cleaner.

5. Place the prepared tip on the nail plate, pressing gently. If the product gets on the cuticles, soak the brush in cleaner and then remove the dirt. Cure in the LED lamp 48 for 30–60 seconds.

6. After removing your hand, gently remove the nail tip from the lamp. Then we give the final shape using a 180-grit file and smooth it with a polisher.***According to our preferences, we can additionally make any styling

7. Apply a layer of hard top to give it a very expressive shine. Cure in an LED lamp or UV lamp, and then rinse with cleaner.

Application using a stencil:

1. Gently mat the nail with a polishing block. Push back the cuticles and, if necessary, remove them with pliers.

2. Place the form (template) under the nail. Apply the product to 3/4 of the nail surface, then gently stretch the product down to obtain the desired length. The brush should be soaked in the cleaner so that it does not stick to the product. Cure time in the LED lamp is 48-60 seconds. If we have a problematic tile, we can apply a thin layer of Hard Base or Base Extra and cure it in a 48W LED lamp according to the table. You can also use Primer.

3. After removing your hand from the lamp, remove the form and then apply the product again to 3/4 of the nail surface, then stretch it gently up (under the cuticles) and down to cover the entire nail. The brush should be soaked in the cleaner to prevent it from sticking to the product. Cure time in the LED lamp is 48-60 seconds.

4. After hardening, file the nail to give it the desired shape, using a 180-grit file.. 5. Apply a layer of hard top to give it a very distinctive shine. Harden in an LED or UV lamp, and then rinse with a cleaner.

Di-HEMA Trimethylhexyl Dicarbamate, Polymethyl Methacrylate, HEMA, Hydroxycyclohexyl Phenyl Ketone, Trimethylbenzoyl Diphenylphosphine Oxide, p-Hydroxyanisole, +/- CI 77491, CI 77266, CI 77492, CI 77891, CI 60725.

For professional use only. Please read the instructions for use carefully. Avoid contact with skin. Avoid contact with eyes. May cause an allergic reaction. Discontinue use if irritation occurs. Keep out of reach of children.