Building gels from the NN Expert line are used to build and extend the nail plate, both on tips and on a template. You can also do a French styling with them. Thanks to their medium-thick consistency, they are suitable for both beginners and advanced stylists. 

The self-leveling consistency will allow you to achieve the correct shape in a very short time, and after hardening the gel can be easily worked with a file. These products are cured in both LED, UV and CCFL lamps.

Gel-on tips:

1. Before starting work, we disinfect our and our client's hands.

2. With a rosewood stick or a metal hoof, carefully push the cuticles away. If necessary, cut the cuticles using pliers.

3. We shorten the natural nail as much as possible with a 180-grit file and matt the surface of the plate with a polishing block or polisher, paying special attention to the area around the nail shafts.

4. We remove the dust with a brush. We clean the nails with a cotton swab soaked in nail cleaner, then degrease them using the nail prep product. We are waiting for the product to evaporate.

5. We match the tips to each nail. Apply glue only to the tip pocket, then apply the tips to the nail and press. We wait a while for the glue to set. The natural nail must rest in the tip pocket.

6. Tips are shortened to the desired length using a guillotine.

7. Using a file with a grain size of 100/180, we work out the tips, and we even out the transition between the tips and the natural nail. We try not to file the natural nail. Finally, we smooth the whole thing with a polishing block.

8. We remove the dust with a brush. We clean the nails with a cotton pad soaked in nail cleaner.

9. Apply a thin layer of builder gel in the selected shade to the natural nail and on the tips. Cure in a UV or LED lamp according to the table. We don't wash!

10. Then apply a thicker layer of builder gel in the selected shade. Again, cure in a UV or LED lamp according to the table. We don't wash!

11. If the nails are not sufficiently built, repeat step 7. After curing in the lamp, wash the nails with a cotton pad soaked in nail cleaner.

12. With a file with a grain size of 180, we give the nails their final shape and level out any unevenness. Wash again with nail cleaner.

13. On nails prepared in this way, we can immediately apply any colour, e.g., hybrid varnish, without the need to apply a base, and then secure it by applying a selected hybrid top. We can also leave the nails colourless.

14. At the end, we apply olive oil that will moisturise and nourish the cuticles.


Gel on the stencil:

1. Before starting work, we disinfect our and our client's hands.

2. With a rosewood stick or a metal hoof, gently push back the cuticles. Cut the skins if necessary.

3. The natural nail is shortened with a 180-grit file. The surface of the plate is matted with a polishing block or a polisher, paying particular attention to the area around the nail shafts.

4. The resulting dust is removed with a brush. Wash the nails with a cotton swab soaked in nail cleaner, then degrease using nail prep. We are waiting for the product to evaporate.

5. We put a form or template under each nail.

6. We apply a thin layer of builder gel only on the natural nail, not on the template. Cure in a UV or LED lamp according to the table. We don't wash!

7. Then, apply a thin layer of builder gel in the selected shade to the natural nail and the form or template (up to the selected length). We cure the gel in a UV or LED lamp according to the table. We don't wash!

8. After curing, gently remove the mold or template. Apply another, slightly thicker layer of the same product. Cure in a UV or LED lamp according to the table. We don't wash!9. If the nails are not sufficiently built, repeat step

9. After curing in the lamp, wash the nails with a cotton pad soaked in nail cleaner.

10. With a 180-grit file, we give the nails their final shape. We even out any inequalities. Wash again with nail cleaner.

11. On nails prepared in this way, we can immediately apply any colour, e.g., hybrid varnish, without the need to apply a base, and then secure the colour by applying the selected hybrid top.

12. We can also leave the nails without a hybrid colour.

13. At the end, we apply olive oil that will moisturise and nourish the cuticles.

Ingredients: di-hema trimethylhexyl dicarbamate, glycerol propoxy triacrylate, trimethylolpropane trimethacrylate, hema, ethyl trimethylbenzoyl phenylphosphinate, hydroxycyclohexyl phenyl ketone, +/- ci 19140, ci 158 50, ci 60725, ci 77891.

For professional use only. Please read the usage carefully. Avoid skin contact. Avoid contact with eyes. May cause an allergic reaction. Discontinue use if irritation occurs. Keep away from children.